--- exim-4.30/scripts/Configure-Makefile.config	2003-12-01 11:15:41.000000000 +0100
+++ exim-4.30/scripts/Configure-Makefile	2003-12-04 15:22:26.000000000 +0100
@@ -130,7 +130,7 @@
 
   mv $mft $mftt
   echo "PERL_CC=`$PERL_COMMAND -MConfig -e 'print $Config{cc}'`" >>$mft
-  echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts`" >>$mft
+  echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts` \$(CFLAGS)" >>$mft
   echo "PERL_LIBS=`$PERL_COMMAND -MExtUtils::Embed -e ldopts`" >>$mft
   echo "" >>$mft
   cat $mftt >> $mft
--- exim-4.30/Local/Makefile.config	2003-12-04 15:22:26.000000000 +0100
+++ exim-4.30/Local/Makefile	2003-12-04 15:28:11.000000000 +0100
@@ -98,7 +98,7 @@
 # /usr/local/sbin. The installation script will try to create this directory,
 # and any superior directories, if they do not exist.
 
-BIN_DIRECTORY=/usr/exim/bin
+BIN_DIRECTORY=/usr/sbin
 
 
 #------------------------------------------------------------------------------
@@ -114,7 +114,7 @@
 # don't exist. It will also install a default runtime configuration if this
 # file does not exist.
 
-CONFIGURE_FILE=/usr/exim/configure
+CONFIGURE_FILE=/etc/exim/exim4.conf
 
 # It is possible to specify a colon-separated list of files for CONFIGURE_FILE.
 # In this case, Exim will use the first of them that exists when it is run.
@@ -132,7 +132,7 @@
 # owner of a local mailbox.) Specifying these values as root is very strongly
 # discouraged.
 
-EXIM_USER=
+EXIM_USER=93
 
 # If you specify EXIM_USER as a name, this is looked up at build time, and the
 # uid number is built into the binary. However, you can specify that this
@@ -153,7 +153,7 @@
 # for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless
 # you want to use a group other than the default group for the given user.
 
-# EXIM_GROUP=
+EXIM_GROUP=93
 
 # Many sites define a user called "exim", with an appropriate default group,
 # and use
@@ -227,7 +227,7 @@
 # This one is special-purpose, and commonly not required, so it is not
 # included by default.
 
-# TRANSPORT_LMTP=yes
+TRANSPORT_LMTP=yes
 
 
 #------------------------------------------------------------------------------
@@ -236,9 +236,9 @@
 # MBX, is included only when requested. If you do not know what this is about,
 # leave these settings commented out.
 
-# SUPPORT_MAILDIR=yes
-# SUPPORT_MAILSTORE=yes
-# SUPPORT_MBX=yes
+SUPPORT_MAILDIR=yes
+SUPPORT_MAILSTORE=yes
+SUPPORT_MBX=yes
 
 
 #------------------------------------------------------------------------------
@@ -253,16 +253,18 @@
 LOOKUP_DBM=yes
 LOOKUP_LSEARCH=yes
 
-# LOOKUP_CDB=yes
-# LOOKUP_DNSDB=yes
-# LOOKUP_DSEARCH=yes
+LOOKUP_CDB=yes
+LOOKUP_DNSDB=yes
+LOOKUP_DSEARCH=yes
 # LOOKUP_IBASE=yes
-# LOOKUP_LDAP=yes
+LOOKUP_LDAP=yes
+LDAP_LIB_TYPE=OPENLDAP2
+LOOKUP_LIBS=-lldap -llber
 # LOOKUP_MYSQL=yes
-# LOOKUP_NIS=yes
-# LOOKUP_NISPLUS=yes
+LOOKUP_NIS=yes
+LOOKUP_NISPLUS=yes
 # LOOKUP_ORACLE=yes
-# LOOKUP_PASSWD=yes
+LOOKUP_PASSWD=yes
 # LOOKUP_PGSQL=yes
 # LOOKUP_WHOSON=yes
 
@@ -270,7 +272,7 @@
 # LOOKUP_LSEARCH is enabled. However, we retain these for backward
 # compatibility. Setting one forces LOOKUP_LSEARCH if it is not set.
 
-# LOOKUP_WILDLSEARCH=yes
+LOOKUP_WILDLSEARCH=yes
 # LOOKUP_NWILDLSEARCH=yes
 
 
@@ -386,9 +388,9 @@
 # included in the Exim binary. You will then need to set up the run time
 # configuration to make use of the mechanism(s) selected.
 
-# AUTH_CRAM_MD5=yes
-# AUTH_PLAINTEXT=yes
-# AUTH_SPA=yes
+AUTH_CRAM_MD5=yes
+AUTH_PLAINTEXT=yes
+AUTH_SPA=yes
 
 
 #------------------------------------------------------------------------------
@@ -466,10 +468,11 @@
 # leave these settings commented out.
 
 # This setting is required for any TLS support (either OpenSSL or GnuTLS)
-# SUPPORT_TLS=yes
+SUPPORT_TLS=yes
 
 # Uncomment this setting if you are using OpenSSL
-# TLS_LIBS=-lssl -lcrypto
+TLS_INCLUDE=-I/usr/kerberos/include
+TLS_LIBS=-lssl -lcrypto
 
 # Uncomment these settings if you are using GnuTLS
 # USE_GNUTLS=yes
@@ -520,7 +523,7 @@
 # Once you have done this, "make install" will build the info files and
 # install them in the directory you have defined.
 
-# INFO_DIRECTORY=/usr/share/info
+INFO_DIRECTORY=/usr/share/info
 
 
 #------------------------------------------------------------------------------
@@ -533,7 +536,7 @@
 # %s. This will be replaced by one of the strings "main", "panic", or "reject"
 # to form the final file names. Some installations may want something like this:
 
-# LOG_FILE_PATH=/var/log/exim_%slog
+LOG_FILE_PATH=/var/log/exim/%s.log
 
 # which results in files with names /var/log/exim_mainlog, etc. The directory
 # in which the log files are placed must exist; Exim does not try to create
@@ -582,7 +585,7 @@
 # files. Both the name of the command and the suffix that it adds to files
 # need to be defined here. See also the EXICYCLOG_MAX configuration.
 
-COMPRESS_COMMAND=/usr/bin/gzip
+COMPRESS_COMMAND=/bin/gzip
 COMPRESS_SUFFIX=gz
 
 
@@ -590,7 +593,7 @@
 # If the exigrep utility is fed compressed log files, it tries to uncompress
 # them using this command.
 
-ZCAT_COMMAND=/usr/bin/zcat
+ZCAT_COMMAND=/bin/zcat
 
 
 #------------------------------------------------------------------------------
@@ -599,7 +602,7 @@
 # (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded
 # Perl costs quite a lot of resources. Only do this if you really need it.
 
-# EXIM_PERL=perl.o
+EXIM_PERL=perl.o
 
 
 #------------------------------------------------------------------------------
@@ -609,7 +612,7 @@
 # support, which is intended for use in conjunction with the SMTP AUTH
 # facilities, is included only when requested by the following setting:
 
-# SUPPORT_PAM=yes
+SUPPORT_PAM=yes
 
 # You probably need to add -lpam to EXTRALIBS, and in some releases of
 # GNU/Linux -ldl is also needed.
@@ -668,9 +671,9 @@
 # You may well also have to specify a local "include" file and an additional
 # library for TCP wrappers, so you probably need something like this:
 #
-# USE_TCP_WRAPPERS=yes
-# CFLAGS=-O -I/usr/local/include
-# EXTRALIBS_EXIM=-L/usr/local/lib -lwrap
+USE_TCP_WRAPPERS=yes
+CFLAGS=-g -O
+EXTRALIBS_EXIM=-lwrap -lpam -ldl
 #
 # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM
 # as well.
@@ -719,11 +722,12 @@
 # haven't got Perl, Exim will still build and run; you just won't be able to
 # use those utilities.
 
-# CHOWN_COMMAND=/usr/bin/chown
-# CHGRP_COMMAND=/usr/bin/chgrp
-# MV_COMMAND=/bin/mv
-# RM_COMMAND=/bin/rm
-# PERL_COMMAND=/usr/bin/perl
+CHOWN_COMMAND=/bin/chown
+CHGRP_COMMAND=/bin/chgrp
+
+MV_COMAND=/bin/mv
+RM_COMMAND=/bin/rm
+PERL_COMMAND=/usr/bin/perl
 
 
 #------------------------------------------------------------------------------
@@ -917,7 +921,7 @@
 # (process id) to a file so that it can easily be identified. The path of the
 # file can be specified here. Some installations may want something like this:
 
-# PID_FILE_PATH=/var/lock/exim.pid
+PID_FILE_PATH=/var/run/exim.pid
 
 # If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
 # using the name "exim-daemon.pid".